FDM (Fine Design Marine) Hardware NEW
- All FDM Hardware is available in Anodized Blue,
Purple or natural Aluminum
finish. Specify your preference in the comments box on the billing
page! |
|
Model |
Specs |
Price |
|
FDM Hardware Packages |
FDM
12 - 24 cell+ all-in-one 21EGSRA Hardware
|
Fine
Design's NEW 21EGSRA - Race Designed - proven to win its very first
showing! Fine Design's new 21 electric or gas strut rudder assembly,
hydro or mono, this 2-in-1 strut rudder assembly is designed for 12 to
24 cells plus. For today's super powered motors, fully adjustable
strut, lifetime guarantee. Available in .130 or .150 cable
sizes (Both use 3/16ths propeller stub shaft). |
|
FDM 6-8 cell all-in-one
Mono Hardware
 |
Everything you need from
motor mount to prop! Kit includes Customized FDM adjustable strut and
bracket with Octura rudder attached for all-in-one convenience and
performance, trim tabs, rudder linkage and rubber boot seal, flex shaft
and teflon tube cable liner, aluminum stuffing tube, motor mount and
hardware, Octura y531 plastic prop, antenna mount and velcro.
Pictures of the FDM 6-8 cell all-in-one
package installed on a H2O UFO. |
|
NEW
FDM 8-16 cell Hydro Complete Hardware
Kit
 |
Everything you need from
motor mount to the tip of the prop shaft *prop not included. Kit includes Customized FDM adjustable strut and
bracket, FDM water pickup wedge rudder and post bracket rudder linkage and rubber boot seal,
5mm flex hex shaft coupler
.130x3/16ths flex shaft
and teflon tube cable liner, brass stuffing tube, motor mount and
hardware, Skid fin, antenna and velcro. |
|
NEW FDM Basic 6
Piece Hydro Hardware Kit
 |
Basic may not be the best
word for this kit, it's first class all the way! It is a kit for the
boater who already has many of the items in the kit above. The 6 piece
basic kit comes with: strut, long strut mount, rudder, rudder arm,
standoff and base. *prop and shaft not included. |
|
|
FDM Struts |
|
FDM Mini
Turbo Strut |
Fully
adjustable, very sturdy, machined aluminum, 1/8" bore strut
and cable, for 6-8 cell monos. Lifetime Guarantee. |
|
FDM
TS Turbo Strut
 |
Fully
adjustable, very sturdy, machined aluminum, purple anodized, 3/16" bore strut,
handles 3/4 - 3 Horse Power Motors Fits Monos 26" - 52." Lifetime Guarantee. |
|
FDM
GS Drive Strut
 |
2
3/4" long with Lead Teflon installed, purple anodized; fits 3/16" stub shafts.
Fixed for a bigger foot print. Some of the fastest mono hulled boats in the USA use this
design. Lifetime Guarantee. |
|
FDM 7075 Strut
 |
Machined
out of super strong 7075-T6 aluminum.
Strut comes with with lead Teflon bushing and brass bullet
nose. For 3/16ths shaft size |
|
FDM Strut
|
Machined
out of aluminum.
Strut comes with lead Teflon bushing and brass bullet
nose. For 3/16ths shaft size. |
|
FDM Strut bracket
 
|
Machined aluminum strut bracket, purple anodized.
Short bracket for Hydros and cats, Long bracket for monos. |
|
|
FDM Rudders |
FDM
DR Deluxe Rudder
 |
Alum.
w/water pickup - 3 1/4" long, wedge style, with kick up. Has gone over
75 mph -
Great Unit! Comes complete and assembled. Lifetime Guarantee. |
|
FDM water pickup rudder
 |
Machined aluminum Rudder with water pick up, for 3/16 shaft. |
|
FDM Aluminum Steering Arm
 |
Rudder arm
is machined and uses a setscrew to lock itself to the rudder shaft. |
|
FDM
post style rudder base
 |
Machined aluminum rudder base, purple anodized |
|
FDM rudder post
 |
Machined aluminum rudder post, purple anodized |
|
|
FDM Turn Fins/Trim Tabs |
|
FDM
Composite Hydro Turn Fin |
Composite
turn fin for Hydroplanes, also available with Kickup |
|
FDM
FF Fine Fins
 |
Small 1"
Long - Shark Fin Style - purple anodized left and right turning fins, aluminum. Lifetime
Guarantee. |
|
FDM Racers
med. size Left and right turn fins
 |
Aluminum,
Presharpened. Only available in polished finish. |
|
FDM
FTT Fine Trim Tabs
 |
Fixed
Alum., Super Light Weight - Get The Job Done...Trimming tabs can be bent for adjustments.
Great all purpose tab, purple anodized. Lifetime Guarantee. |
|
|
FDM Couplers |
Square Drive Couplers
 |
8MM x
1/4'' or 10MM x 1/4'' square drive
coupler for your gas or nitro conversion. |
|
FDM
3345
 |
2
5/16 long motor flex coupler. Holds up to 16 cell at 1/2 - 3/4 Horse Power Motors. |
|
FDM
CA
 |
1/4"
x 1/8" Alum. coupler with set screws. "Standard On All Turbo Trans Units."
Lifetime Guarantee. |
|
|
FDM Accessories |
FDM Alum.
motor clamp mounts for 05 diameter motors
 |
Fits 1
3/8ths dia.
example- Nemesis/Hacker/Lehner 1900 series 05 size motors |
|
FDM Alum.
motor clamp mounts for NEU 1515 and 1512 Series
|
Fits NEU
1515 and 1512 Series |
|
FDM Alum.
motor clamp mounts for NEU 1521 and 1527 Series
|
Fits NEU
1521 and 1527 Series |
|
Lehner
2200 Series Clamps
 |
Fits all
2240, 2250, & 2280 Series |
|
30 Series
Clamp Motor mount
 |
Aluminum
construction. Fits 3040, 3060, & 3080 Series |
|
FDM 5''
Rail Motor Mounts.
 |
Aluminum
construction.
Designed to fit where the gas engine or nitro was!
These bolt directly between the 5'' rails in your boat. Mount will
accept Lehner 30 Series and Large Series 2215 & 2230 NEU. Heavy duty
Aluminum, Lifetime Guarantee |
|
FDM
Motor Mount
 |
Composite
motor mount.
Duel bolt
pattern - Fits 1" to 1 1/8" mounting patterns (700/775 motors and
540/Hacker B-50/Lehner Basic and 19 series/Aveox/Mega/Plet 20/30/40
motors) |
|
|
FDM Pushrod Seal Kit |
1 stainless pushrod - 2 sets of collar locks, rubber
boot seal for pushrod. Fits all. |
|
|
FDM Stuffing box and Teflon Liner |
1 Brass
tube and 1 Teflon Liner for .130 or .150 Flex Shaft |
|
FDM
HT Header Tubes
 |
8
Piece, super cool and light weight, black, 90" Elbow, male one end and hollow on the
other; EZ to install.
5 Different sizes Available Sizes: |
|
